Align both sides of the binding first; || Then insert the two ends of the strap through the uppermost holes; || Follow the same method and cross through the bottom holes, similar to shoelaces; || put all the holes on the DRESS through, tidy up the bend of the lower binding; || Tie a bow on the extra binding part. || If you do not want the excess of the tie to show, just tuck the bow inside the dress.
Step 1: Align the two sides of the strap first, so that after the dress strap is tied, both sides will be about the same length, as shown in the picture below.
Step 2: Then thread the two ends of the binding through the above holes, as shown below.
Step 3: Follow the same method to cross the hole below, some similar to the method of tying shoelaces.
Step four: After all the holes on the dress are worn, arrange the bend of the lower binding, so that it will be more beautiful after tying.
Step five: Tie the extra straps and then tie them into bows.
Step 6: If you don't want the excess of the tie to show, tuck the bow inside the dress.