Winding method: Wrap a thin thread around the side of the ring near the palm of your hand.
Tape: Tape the tape to the inside of the ring.
Washer: Create a metal washer from the same ring material and insert it into the inner wall of the ring.
Resize: Go to the store where you bought the ring and have it resized.
Change rings: Find the manufacturer to change rings.
The ring size is wrong - the ring is too big
1, winding method
Wrap a thin thread around the side of the ring against the palm, and determine the thickness of the thread and the number of coils according to the gap between the finger and the ring.
2, stick tape
Cut clear tape about the width of the ring and attach it to the inside of the ring. Wrap plastic wrap around the inside of the ring in addition to tape. However, the comfort of adhesive tape may be less.
3. Washer
The so-called washer is actually a metal washer made of the same ring material according to the specific size of the ring, and it is embedded in the inner wall of the ring.
The advantage of the ring washer is that it solves the problem of the size of the ring, and has less impact on the ring itself and the usual wearing. And if you feel that the ring is too small in the back, you can also remove the washer, so that the ring size will become larger and very flexible.
4. Change the size
Generally, if you buy a big ring, you can also go to the shop where you buy the ring to modify the size. Now many jewelry stores, ring brand stores are to provide modified ring size services. However, not all rings can be modified, but also depends on the style of the ring.
5. Find the manufacturer to change the ring tray
If the diamond ring size is obviously too large, simply modifying the ring holder size will not work, because the size to be changed is too large, and it is easy to deform after the change. At this time, you can find the manufacturer to change the ring care, there will be an additional charge for the ring care, the cost is generally the price of the new ring care less the recovery price of the original ring care.
Second, the ring size is wrong - the ring is small
1. Change the size
It is generally difficult to change the size of the ring, and it may need to add ring raw materials, so it will need to increase the price.
2. Replacement
This is the most direct and the best way.
3, grinding ring
It is also possible to find a ring repair facility and wear off one layer of the inner ring.
4. Change the style
Some rings can not be changed, or the cost of change is too high, you can choose to change a suitable size.
5, directly to the manufacturer to change rings
If the ring size is too small, you can also find the manufacturer to change the ring, but the ring will be charged extra.
Three, how to measure the ring size
1, fine strip measurement
Prepare a slip of paper, pen and ruler. Cut a strip of paper with a width of no more than 1 cm, and the edge should be flat to reduce measurement errors. Wrap the slip of paper around the finger wearing the ring, just enough to fit the knuckle, hold the nail at the intersection, hold the slip of paper in one hand, mark the intersection with a pen to measure the distance, and record the number. To measure finger size in this way, it is recommended to measure several times and then take the average, so that it is more accurate.
2. Measuring the inner diameter of the ring
If you have a ring of the right size, you can put this ring flat on a piece of paper, draw a circle along the inner circle with a pen, and then measure the diameter with a ruler, and then compare the ring size to the table to get the size of the ring.
3, professional tool measurement
Ring size stick is a special tool used to measure hand size. This tool consists of a size stick with a number of notches and a string of rings of different sizes. The measurement method is to wear a ring that fits the finger on the finger, then remove the ring on the ring rod, and compare the value. Most of the time, only jewelry stores stock such tools.