Washer: Add a layer of washer to the inner ring of the ring, and then polish it; Gold cutting method: cut part of the ring and then weld it on, but this method has a higher risk of damaging the ring; Change the ring: The diamond or gemstone can be removed and replaced with a suitable ring.
1. Ring washer
The washer method can only be operated by professional staff, and the washer method is to add a layer of washer to the ring according to the size of the user's finger, and must use the same material as the ring material pad to the inner wall of the ring, and then after grinding and polishing, no trace of change can be seen.
2. Gold cutting method
The operation of the gold cutting method is more difficult, and the technical requirements for the operator are relatively high, because the gold cutting method is to cut off a part of the ring and then weld it on, which is easy to damage the ring. The gold cutting method is only suitable for rings without decorations, but the range of changes is relatively large, and we should choose carefully.
3. Replace the ring rest
This method of modifying the ring size is usually used for diamond rings or gemstone rings, and is not suitable for rings with special ring design or pure ring rings. If your ring band does not fit, you can ask the staff of the jewelry store to remove the diamond or gemstone and reinstall it on a new ring band. This method not only retains the diamond but also makes the ring size appropriate. It is also a more common method.