If you feel that the ring is very tight on the hand and want to take it off, you can take the rotation method, lubrication method, lifting method, cold water method, winding method, etc., you can also find professional knowledge to help take it off.
Why is the ring so tight
2. Lubrication method
Rotate the ring back and forth and apply lubricant to the entire finger wearing the ring. Rotate the ring back and forth on the finger once or twice, while spraying or rubbing more lubricant on it, and gently pull the ring off the finger.
By raising the finger higher, you can put it further away from the heart, which will slow down the flow of blood, which will speed up the flow, which will allow the swelling to go down as quickly as possible before you try to remove the ring.
If you have a rubber band, you can also slowly tie it from the bottom of the finger, using this way, to block out the blood, and then remove the ring bit by bit.
5. Winding method
Thread a cotton thread through the ring, using a needle, toothpick, or small piece of steel to help get through.
6. Find a professional
If the hand is swollen, the ring is very difficult to take down or even the ring has been embedded in the finger skin, then it is recommended to find a professional with a chainsaw or ring pliers and other tools to cut the ring, this way is easy to hurt their fingers, so do not recommend their own.
1, the ring is worn after the finger, will not appear very tight, clenched fists will not appear tight muscle phenomenon, gently shake the wrist, will not appear loose phenomenon, so it is more appropriate.
2, you can also wear the ring on the hand, gently flick the ring with your finger. If you can easily turn a circle, there will be no drop phenomenon, it means that the size of the ring is more appropriate, or bend your fingers, can freely move without tension.