There are three main methods for reducing the ring: winding method, washer method and gold cutting method.
Winding method is the most traditional way to solve the ring loose, the past commonly used red winding, but with the ring color does not match, affecting the aesthetic effect. Find a piece of fishing line or thread of a similar color to the ring and wrap it around one side of the ring near the palm of your hand. The thickness of the winding depends on the size of the gap between the ring and the finger, and the tightness can be felt properly.
2. Washer method
The washer method can only be operated by professional staff, the washer method is to add a layer of washer in the ring ring according to the size of the user's finger, and must use the same material as the ring material pad to the inner wall of the ring ring, and then after grinding and polishing, no trace of change can be seen.
When the ring is big, you can cut off a section of the ring support by the gold cutting method, and then weld and polish it, so that the size of the ring will be smaller. However, many rings are not suitable for using the gold cutting method to reduce the size, and the rings suitable for using the gold cutting method to reduce the size are those rings with simple structure, no diamond setting and carved patterns.